英国GRIMM格林进口卫生级自吸回程泵 UK GRIMM import sanitary self suction return pump
英国GRIMM格林进口卫生级自吸回程泵概述:
进口卫生级自吸回程泵是消化吸收了英国格林同类产品的优点，结构设计紧凑合理，制造精密。卫生型部分材料均为耐酸不锈钢(SUS316)制成，耐酸碱腐蚀特性，尤为显著，符合食品卫生要求。
进口卫生级自吸回程泵特性在于能输送混有空气或泡沫的液体，甚至能在只有空气的泵腔照样自行输送。
该泵是通过对空气的压缩，使泵腔内最高能产生0.6的负压，在流体行业被广泛用于液体的自吸输送泵。特别是用在CIP清洗系统，将罐内和CIP返回管路中的液体自吸输送，使管道保持无积水。
英国GRIMM格林进口卫生级自吸回程泵特点:
1、进口卫生级自吸回程泵，其泵体部分材料，均为耐酸不锈钢制成(AISI 316),，耐酸碱腐蚀特性，尤为显著，符合食品卫生要求。
2、优于离心泵的特性,在于能吸取混有空气或泡沫的液体，甚至能在只有空气时，照样自行抽吸，该泵是容积式泵。广泛用于液位低于泵的吸取物料，如在吸奶间，可将奶自奶桶中吸出，或可在自动CIP清洗系统中，作为清洗缸的回程泵，机械密封为内装内流式，吸取物料的温度不高于100℃。
英国GRIMM格林进口卫生级自吸回程泵技术参数:
流量：10-30m3/h
扬程：18-24m
吸程： 5-6m
功率： 2.2-7.5KW
转速：1450r/min
材 质：SUS316L (在材料的选用上泵体、泵盖、叶轮等凡与物料接触之零件由SUS316L不锈钢制造)，过液密封材质为EPDM三元乙丙橡胶
标 准：DIN、 SMS
叶 轮：敞开式叶轮，不留卫生死角。
轴 封：机械密封的静环由SUS316L钢内嵌石墨构成，动环则由碳化硅制成。
表面处理：接液部分抛光，其余亚光或喷砂处理。
最大进口压力：0.5MPa
温度范围：-10°C~+140°C(EPDM)
可冲洗机械密封：
水压：最高0.1MPa
水量：0.25-0.5L/min
表面处理：内接液部分抛光，其余亚光或喷砂处理
内表面处理：抛光
连接方式：螺纹活接，卡箍，法兰
过液密封材料：乙丙橡胶(EPDM)，硅橡胶
英国GRIMM格林进口卫生级自吸回程泵电机:
1、根据配置主要采用“ABB，西门子，东元”品牌的三相交流电机，按照国际电工委员会IEC60034.IEC60072标准设计制作，符合欧共体“CE”标记要求。
2、可供选用防爆电机，以满足不同场合的需要。
3、优越的电气性能、低噪音、低震动，电机的标准设计防护等级为IP55，绝缘等级为F级。
4、工作电压：
≤3Kw，220-240V/380-420V，△/Y
＞3Kw，380-420V/660-690V, △/Y
5、频率：50Hz/60Hz
6、工作方式：连续（SI）
7、转速：标准泵的转速为1450r/min
英国GRIMM格林进口卫生级自吸回程泵应用:
药品类：输液，蒸馏水，高纯水，含颗粒3-6毫米的中药液体，浸出液；
化妆品类：染料，酒精，香精油；
乳品类：乳清，奶油，牛奶，糖液；
饮料类：酒精，白酒，啤酒，麦芽汁， 发酵液，果汁饮料，带颗粒饮料；
其它：糖果业，焙烤业，化工领域等。
UK GRIMM Introduction of imported sanitary suction return pump summary:
imported sanitary grade self suction return pump is the advantage of digesting and absorbing the similar products of Green in Britain. It is compact and reasonable in structure design and precise in manufacture. Some of the sanitary materials are made of acid resistant stainless steel (SUS316), and the acid and alkali corrosion resistance is particularly remarkable, which meets the requirements of food hygiene.
imported sanitary grade self suction return pump is characterized by the ability to transport liquid mixed with air or foam, and even pump the air in only air.
The pump through the compression of the air, so that the pump cavity can produce a maximum of 0.6 negative pressure, in the fluid industry is widely used in liquid self-priming pump. Especially in the CIP cleaning system, the tank and CIP return to the pipeline in the liquid self-priming transport, so that the pipe remained free of water.
UK GRIMM Introduction of imported sanitary suction return pump characteristic:
1.imported sanitary grade self-priming return pump, the pump parts of the material are made of acid resistant stainless steel (AISI 316), acid and alkali corrosion characteristics are particularly significant, in line with food hygiene requirements.
2.Better than the characteristics of centrifugal pumps, is to absorb mixed with air or foam liquid, and even in the air only when the self suction, the pump is a displacement pump. Widely used in the level below the pump absorbing material, such as milk, milk from the milk bucket can be sucked out, or in the automatic CIP cleaning system, the cleaning cylinder return pump, mechanical seal for the flow inside, draw the temperature of the material is not higher than 100 ℃.
UK GRIMM Introduction of imported sanitary suction return pump technical Parameters:
Flow rate: 10-30m3/h
Lift: 18-24m
Range of suction: 5-6m
Power: 2.2-7.5KW
Speed: 1450r/min
Material: SUS316L (material in the selection of pump body, pump cover, impeller and other parts of all contact with the material made by SUS316L stainless steel), a liquid sealing material for EPDM three EPDM
Standard: DIN, SMS
Impeller: open impeller, leaving no sanitary corners.
Shaft seal: the mechanical seal ring is made of graphite embedded in SUS316L steel, and the moving ring is made of silicon carbide.
Surface treatment: wetted parts polishing, the matte or sandblasting.
Maximum inlet pressure: 0.5MPa
Temperature range: -10℃~+140℃(EPDM)
Washable mechanical seal:
Water pressure: maximum 0.1MPa
Water quantity: 0.25-0.5L/min
Surface treatment: the remaining portion of the polishing liquid inscribed, matte or sandblasting
Internal finish: polishing
Connection: thread, live, clamp, flange
Liquid sealing material: ethylene propylene rubber (EPDM), silicone rubber
UK GRIMM Introduction of imported sanitary suction return pump motor:
1.according to the configuration, mainly using "ABB, SIEMENS, East yuan" brand three-phase AC motor, according to the International Electrotechnical Commission IEC60034.IEC60072 standard design and production, in line with EC "CE" mark requirements.
2.explosion-proof motor can be used to meet the needs of different occasions.
3.superior electrical performance, low noise, low vibration, motor standard design, protection level is IP55, insulation class is F level.
4.work voltage:
3Kw, 220-240V/380-420V, /Y
3Kw, 380-420V/660-690V, /Y
5.frequency: 50Hz/60Hz
6.work: continuous (SI)
7.speed: standard pump speed of 1450r/min
UK GRIMM Introduction of imported sanitary suction return pump application:
Medicine: infusion, distilled water, high pure water, containing 3-6 millimeters of Chinese medicine liquid, leaching solution;
Cosmetics: dyes, alcohol, essential oils;
Dairy products: milk, cream, whey, sugar;
Beverages: alcohol, spirits, beer, wort, fermented juice, fruit juice, and soft drinks;
Others: Confectionery, bakery, chemical, etc.
上面就是商务服务为大家带来的：进口卫生级自吸回程泵(欧美进口十大品牌)的全部内容了，更多的相关信息请关注商务服务分类。